How to Join PVC Pipes in Very Tight Spaces

Occasionally I pick up a job where I need to remove a solenoid and replace with another, but once the ground is excavated we discover a series of closely joined PVC fittings with nowhere to cut into. A tight series of elbows and tees can be a challenge to remove and refit.

A recent job saw solenoids lined up against a concrete driveway on one side and then dense roots on the other and this morning I needed to replace 5 solenoids all in a very tight confined space.

So if you need to do this what are you looking for?

The biggest thing to remember is that you want to plan what you do before you start.

– Solenoids that have an outlet onto black poly will be the easiest to work with because of the flex in the pipe.

– If there isn’t room to use a slip fix (telescopic fitting) to join pipes then you need to rely on there being some lateral movement in the pipes themselves. Always join the least movable parts first and save the moveable ones until you need to make a final join.

– Cut precisely and check your measurements. Sometimes – when you need to join PVC fittings side by side if you don’t get it perfectly right you can end up having to disassemble everything and starting over.

At the end of the day the goal is to get things joined up and working so if you need to get creative and run some pipe and fittings around a bit to get a join then that is better than not being able to make it work.

I don’t have any pics, but this is one of those jobs where it almost always pays to get someone in to do it. It will probably save you a lot of headaches!

 

Comments are closed.