Setting up a Reticulation Controller for a Bore

The big difference between setting up a controller for a bore and a system of mains is that the ‘master’ terminal actually serves to trigger the pump and a relay must be installed between controller and pump to get it going.

So you will always pay a bit more to get a bore system set up electrically.

Of course there is no requirement for a master valve as the system is not under constant pressure, so you will save on that front.

To get this set up properly you will need to call a qualified electrician and have them do the electrics for you.

For help with any of these issues call Andrew on 0400044236 or email brightonreticulation@gmail.com

Setting up a Reticulation Controller for a Bore

Leave a Reply

Your email address will not be published. Required fields are marked *