Everything is off But My Solenoid is On

So what’s the deal when your retic box if switched to off and a solenoid is still receiving an electrical signal and is stuck open?

Honestly I have no idea…

But its happened to me 3 times now and today I was able to resolve it.

The first two times were with Hunter EC 2 station control boxes and I couldn’t find a solution and ended up changing the box over. It was a faulty box, but this time I had another 3 terminals to test before doing a swap. On terminals 4 & 5 the solenoid stuck open (there was negilible voltage coming from the terminals (4V) but when I switched the wires to terminal 6 the problem went away.

I have no idea what was going on but on each occasion it has been a Hunter control box that has been the problem. Today was a brand new X Core.

So if you find a solenoid stuck open despite there being no voltage going to it maybe you’re not crazy. Maybe its the control box doing some crazy stuff