Irritrol Kiwkdial Fuse Message?

irt_con_kwikdial_s_lg
Every summer one of the most common requests we get is to fix the ‘fuse message’ on Irritrol Kiwkdial controllers.

The message flashes and shows a battery symbol (even though the device has no battery) and it will not operate the retic.

The short answer to what is happening is one of two things:

a) The controller is on the way out. If it does this intermittently and if the display is shaking then count on it being the controller.

b) There is a problem with a solenoid and it is sending a message back to the controller telling it that the coil on the solenoid needs replacing.

We can diagnose within 5 minutes and have you up and running again quickly.

Irritrol Kiwkdial Fuse Message?

Leave a Reply

Your email address will not be published. Required fields are marked *