I don’t know how many people have checked their water pressure in the Capricorn estate in Yanchep, but after working on a job today I was shocked at how poor the water pressure is.
In a backyard of 5m x 11m we would normally use one station of MP Rotators evenly spaced and have heaps of water pressure to spare, but today we needed 3 separate stations of Toro precision nozzles for that one small area. That’s the only option when the pressure is lousy and the flow rate is 10l/min. We tried putting 3 MP 2000′s on a line but there wasn’t enough grunt to make then get up.
The bigger drama was that the solenoids refused to seal because of the ultra-low pressure. We tried about 15 different Richdels and none of them would seal and ended up having to head down to the shop and grab some Hunters. Solenoids need a certain amount of water pressure to create the seal and this was so low that we couldn’t get that seal. It was almost a give up and call it a day scenario.
Persistence and a very gracious client made a hot, windy, difficult day a much better experience than it could have been. So if you live in Capricorn I’d be interested to hear if you have also had water pressure problems. I was due to do another backyard install in Capricorn tomorrow, but I have postponed it until we can find a way around these nasty water pressure issues.