Ok so you’ve stuck a spade through a PVC pipe or maybe just pierced it. How do you repair it without digging it all up so you have enough flex to insert a coupling?
There are two options.
The first is the best option for a significant break and that is to use a slipfix/ telescopic fitting. Simply cut the pipe at either end, attach a PVC coupling to one side and then glue the narrow end of the slipfix into the coupling. Allow a couple of minutes for it to dry and then slide it over the other end of the pipe.
Give it some time to dry and you’re done. Simple.
A different method that I have used on several occasions is to use a ‘snap on’ tee to fix a small hole. If it is a puncture or a blow out and the hole is 5ml in diameter or thereabouts then you can simply smother the snap on fitting in glue, cover the pipe with glue and press it over the break.
I have worried that these may come away under pressure, but so far no problems. This is a cheaper solution than the slip fix obviously.
For help with any of these issues call Andrew on 0400044236 or email brightonreticulation@gmail.com