My Controller Looks Like Its Working But Nothing is Coming on

So you set your controller running and everything looks right on the digital panel, but there is no water?…

What’s going on?…

Well if you are running your retic off the mains then its most likely that there is a problem with your master solenoid. If it isn’t working then you won’t get any water to the different stations.

You can test if this is the issue by locating it, turning it on manually (usually you need to turn the coil a quarter turn anti-clockwise) and then running the system as usual. If everything works with the master valve open then you have found your problem.

If not then the problem may well be the controller itself.

holman-pro-469-controller1

My Controller Looks Like Its Working But Nothing is Coming on

Leave a Reply

Your email address will not be published. Required fields are marked *